Tascam DR-40 - 6 - Playback; Playback Area and Volume Settings

74 TASCAM DR-40
On the Home Screen, you can use the . and / buttons
to select the playback le. The les that you can select are
determined by the playback area setting.
Limiting the playback area makes le selection easier when
you have numerous recorded and copied les on the SD card.
On the PLAY SETTING Screen, you can select all les, the
current folder or the playlist as the playback area. You can also
use the BROWSE Screen to set a folder as the playback area.
TIP
On the BROWSE Screen, regardless of the playback area setting,
you can select any le on the card that you want.
Adjusting playback volume
The volume of output through the built-in speaker or the
/LINE OUT connector can be adjusted using the + or −
button while the Home Screen is shown.
A pull-up volume indicator appears.
Setting the playback area (AREA)
Set the playback area for repeat and ordinary playback on the
PLAY SETTING screen.
1 Press the MENU button to open the MENU Screen.
2 Use the + or − button to select PLAY SETTING and press
the ENTER/MARK or / button.
3 Use the + or − button to select (highlight) AREA, and
press the ENTER/MARK or / button.
4 Use the + or − button to set the playback area.
ALL FILES
Set the playback area as all files in the Music Folder on the
SD card.
6 – Playback