Point the mics at the sound source and place the unit in a
stable location where there is little vibration.
NOTE
The setting of left-right channels is disabled if external
microphones are connected to the EXT MIC/LINE IN jack.
Recording an external device (LINE IN)
Use stereo plug cables to connect to the output of an external
audio device.
Other audio equipment
or external sound source
CAUTION
Reduce the output level of the external audio device if the
•
input sound is distorted even when reducing the input gain
level on the unit.
When an external audio device with a xed output line
•
level is connected, it would be impossible to control the
gain level appropriately because of excessively large input
signals. In such cases, use the headphone jack or other
level-controllable output for connection to the unit.
4 – Recording
To Next Page
Loading...
