When decoding the input,
MS INPUT
appears on the
MIXER
screen. When decoding playback,
MS MONITOR
appears on the
MIXER
screen.
Item Setting range Operation details
WIDE 0–100 Adjusts the width of the sound
At “
0
”, mid is 100%. As the number increases, the amount of
side signal increases.
NOTE
If
MS DECODE
is set to
ON
on the
REC MODE
screen, it cannot be
selected on the
MIXER
screen (
Using by Input
appears).
To use the MS decoder during playback, set
MS DECODE
to
OFF
on the
REC MODE
screen.
9 – Mixer
To Next Page
Loading...
