Installation
CSA7000B Series & TDS7000B Series Instruments User Manual
1-7
The Specifications in Appendix A list the operating requirements for the
instrument. Power source, temperature, humidity, and altitude are listed.
Connecting Peripherals
The peripheral connections are the same as those you would make on a personal
computer. The connection points are shown in Figure 1--1. See Table 1--1 on
page 1--9 for additional connection information.
CAUTION. To avoid product damage, either power off the instrument or place the
instrument in Standby power mode before installing any accessories except a
USB mouse or keyboard to the instrument connectors. (You can connect and
disconnect USB devices with the power on.) See Shutting Down the Instrument
on page 1--10.
Operating Requirements
To Next Page
Loading...
Need help?
General
