Data Input/Output
CSA7000B Series & TDS7000B Series Instruments User Manual
3- 233
Overview Control elements and resourcesTo recall your waveform (Cont.)
Recall your
waveform
8. Touch the Recall button to recall the waveform file. To
cancel without recalling a waveform, touch the Cancel
button.
Display your
reference
waveform
9. Touch Displ ay to toggle the display of the reference
waveform on.
For further
assistance
10. For more help on recalling waveforms, touch the Help
button to access contextual online help.
See page 3--263 to learn about using online help.
You can clear individual references of data or delete waveform files. If you are
sure you do not want the data a reference waveform contains, use the procedures
that follow to clear it. To clear all references and setups, use Tek Secure.
Overview To clear references Control elements and resources
Prerequisites 1. The inst rum ent must be powered up. You must have
access to a waveform saved by the instrument.
H See Powering On the Instrument on page 1--9.
Display the
reference
control window
2. From the toolbar, touch Refs, and select the tab (Ref 1
to Ref 4) of the reference that you want to delete.
Delete the
reference
3. Touch Delet e to delete the reference waveform.
To Clear References
To Next Page
Loading...
Need help?
General
