Data Input/Output
CSA7000B Series & TDS7000B Series Instruments User Manual
3- 255
Remote Communication
Remote communication is performed through the GPIB interface. Consult the
online Programmer Guide for help with establishing remote communication and
control of the instrument.
To access the Programmer Guide, locate the Product Software CD that was
shipped with the instrument. Install the CD in the personal computer that you
want to use, typically your instrument controller. Follow the directions in the CD
booklet.
You can install the guide in the instrument, but that may not be convenient
because it will cover the instrument screen.
For information on connecting the instrument to a network to enable printing,
file sharing, internet access, and other communications functions, see Connect-
ingtoaNetworkon page 1--16.
To Next Page
Loading...
Need help?
General
