Appendix D: Cleaning
D-2
CSA7000B Series & TDS7000B Series Instruments User Manual
Flat Panel Display Cleaning
The display is soft plastic and must be treated with care during cleaning.
CAUTION. Improper cleaning agents or methods can damage the flat panel
display.
Do not use abrasive cleaners or commercial glass cleaners to clean the display.
Do not spray liquids directly on the display surface.
Do not scrub the display with excessive for ce.
Clean the flat panel display surface by gently rubbing the display with a
clean-room wipe (such as Wypall Medium Duty Wipes, #05701, available from
Kimberly-Clark Corporation).
If the display is very dirty, moisten the wipe with distilled water or a 75%
isopropyl alcohol solution and gently rub the display surface. Avoid using excess
force or you may damage the plastic display surface.
To Next Page
Loading...
Need help?
General
