Index
Index- 2
CSA7000B Series & TDS7000B Series Instruments User Manual
modes, 3--35
Envelope, 3--49
record, 3 --36
sampling (see sampling), 3--35
Acquisition controls
acquisition control background, 3--34
acquisition hardware, 3 --34
acquisition modes, 3-- 35
aliasing illustrated, 3--29
average, 3--26, 3--30
condition, 3--28
envelope, 3--26, 3--30
equivalent-time sampling, 3 --37
equivalent-time sampling, illustrated, 3--39
global controls, 3--28
Hi Res, 3--25, 3-- 30
intensity, 3--46
interleaving, 3-- 40
interpolation, 3--39
linear interpolation, 3--39
methods to check and eliminate aliasing, 3-- 29
peak detect, 3--25, 3--30
preventing aliasing, 3-- 29
real time, 3--31
real-time sampling, 3--37
record le ngth, 3--36
repetitive signal, 3 -- 31
roll, 3--28
RUN/STOP, 3--30
Run/Stop button only, 3--27
sample, 3--24, 3--30
sample interval, 3--36
sampling and acquisition mode, 3--37
sampling mode selection, 3-- 38
sampling process, 3 --35
select the acquisition mode, 3--30
set the stop mode, 3--30
set waveform count (average and envelope only),
3--30
sin(x)/x interpolation, 3--39
SINGLE, 3-- 28, 3-- 30
single sequence, 3--28
single sequence off, 3--30
to disable roll mode, 3--34
to enable roll mode, 3--33
to select an acquisition mode, 3--30
to select real-time or equivalent-time sampling, 3--31
to set acquisition modes, 3--29
to set roll bode, 3--33
to single sequence roll mode, 3--33
to start acquiring, 3--32
to start and stop acquisition, 3--32
to stop acquiring, 3--32
to take a single acquisition, 3--32
to turn off roll mode acquisitions, 3--33
trigger point, 3--36
untriggered roll, 3--28
untriggered roll with single sequence, 3--28
using, 3--24
using fast acquisition mode, 3--40
using FastFrame, 3--48
waveform database, 3--26, 3--30
waveform rec ord, 3--36
Acquisition mode, C-- 6
spectral math, 3 --204
Acquisition modes, incompatible with fast acquisitions,
3--41
Acquisition overview, 3--34
Acquisition preview, 3-- 121
Acquisition setup, C--5
Advanced, 3--77
Aliasing, 3--29, 3--204, Glossary--1
eliminating, 3--29
illustrated, 3-- 29
recognizing, 3--204
All, C--12
Amplitude, B--1, C--11, Glossary--1
Analog-to-digital converter, Glossary--1
Analyzer control locks, 3--183
AND, Glossary--1
AND, A Trigger control window, 3--96, 3--98, 3--103
Annotate, 3--146
waveforms on screen, 3--140
Annotated display, 3--141
Appearance, C--9
Applications, 1--14
derivative math waveforms, 3--172
integral math waveforms, 3--174
optional, 1--14
Area, B --1, C--12, Glossary--2
Attenuating optical signals, 3--55
Attenuation, Glossary--2
Attenuation, input, C--4
Auto--increment file name, 3 --222, 3--225, 3--230,
3--243
AutoBright, 3--133
Automated measurements, 3 --140
of FFT math waveforms, 3--205
Automatic measurements, 3--140
high and low levels defined, B--6
levels used in taking, B--5, B--6
reference levels defined, B--6
reference le vels defined (eye pattern/optical), B--7
Automatic trigger mode, 3--65, 3--71, Glossary--2
Autoset, 3--17, C--5, Glossary-- 2
how to execute, 3--15
To Next Page
Loading...
