Tektronix DSA70000D Series - Page 33

About Tektronix oscilloscopes Options
Software:
Opt. DDRA - DDR Memory Bus Analysis; Available , only on 1 GHz and 2 GHz models
(requires DJA)
Opt. DJA - Jitter And Eye Analysis Tools - Advanced (DPOJET)
Opt. ET3 - Ethernet Compliance Testing
Opt. LT - Waveform Limit Testing
Opt. MSOE - 1
6-channel MSO
1
Opt. MTM - Mask Testing for Serial Communication Standards (up to 1.5 Gb/s)
Opt. PS1 - Power Solution Bundle: DPOPWR, P5205A, TCP0030, TPA-BNC, 067-1686-XX
(Deskew Fixture)
Opt. PWR - Power Measurement and Analysis
Opt. SR-AERO - MIL-STD-1553 Serial Triggering and Analysis
Opt. SR-AUTO - Automotive Serial Triggering and Analysis (CAN, LIN, FLEXRAY)
Opt. SR-COMP - Computer Serial Triggering and Analysis (RS-232/422/485/UART)
Opt. S
R-CUST - Custom Serial Analysis Kit for Developers
Opt. SR-DPHY - MIPI-D-PHY (DSI1/CSI2) Serial Analysis
Opt. SR-EMBD - Embedded Serial Triggering and Analysis (I2 C, SPI)
Opt. SR-PCIE - PCI Express Compliance Module for RT-Eye Serial Data Compliance and
Analysis
Opt. SR-USB - USB Serial Triggering and Analysis (LS, FS, HS)
Opt. SR-810B - 8b/10b Serial Triggering and Analysis
Opt. SVE - SignalVu Essentials - Vector Signal Analysis Software
Op
t. SVM - SignalVu General Purpose Modulation Analysis (requires SVE)
Opt. SVP - SignalVu Pulse — Advance Signal Analysis Software (requires SVE)
Opt. SVT - Settling Time Measurements such as Frequency and Phase (requires SVE)
Opt. USB - USB 2 .0 Compliance Testing
Opt. VET - Visual Trigger and Search
Opt. VNM - CAN/LIN Protocol Analysis Software
1
Available for DPO5000 Series. Enabling/disabling this key does not change the model number
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 11