Tektronix GeoProbe G10 Installation Guide

G10 Installation Guide 7.13.2 101 
B
Rev. 005-140228
10 GB PORT SFPS
The G10 probe has the following 10G Ethernet connections (Figure B.2):
 IIC200—four 10G Ethernet ports (4 1/10G ports)
 SRM200 RTM—four 10G Ethernet ports (Xlink 1-4 ports are used in multiprobe
configurations)
 PRM200 RTM or PRM300 RTM—two 10G Ethernet ports (Port C and Port D are used
in multiprobe configurations)
 TRM100 RTM—four 10G Ethernet ports when used with IIC100. When used with
IIC200, the 10G ports are not used for monitored traffic (all monitored traffic connects
to G10 using IIC200).
Figure B.2 - 10 GB Ethernet Ports
TRM100 (Four 10G Ethernet ports when used with IIC100)
PRM200 RTM or PRM300 RTM (10G Ethernet Ports C and D)
SRM200 RTM (Four Xlink Ports)
IIC200 four 10G Ethernet ports (4 1/10G ports)
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited

Tektronix GeoProbe G10 Specifications

General

Brand	Tektronix
Model	GeoProbe G10
Category	Accessories
Language	English