G10 Installation Guide 7.13.2 60
3
Connect Ethernet and SAS Cabling
Rev. 005-140228
Connect IIC/IAP100 SAS Cabling
SAS cabling connections vary depending on the RTM installed with your
configuration. Refer to the following sections for your specific configuration:
SRM200 RTM SAS Connections (One or Two Controllers)
TRM100 RTM or SRM100 RTM SAS Connections
SRM200 RTM SAS Connections
Use Figure 3.12 to connect SAS cables from the G10 to two controller enclosures. Refer to
Figure 3.5 for information about cabling expansion enclosures.
Figure 3.12 - G10 SRM200 RTM SAS Connections
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
To Next Page
Loading...
Need help?
General