System Manual 2. System Overview, Features, and Specifications
76.7300FP11/2, Rev A 8/09 Page 2-5
System Administration
2.12 System administration is performed using Command Line Interface (CLI)
and Simple Network Management Protocol (SNMP). All system provisioning
operations may be performed using either the CLI interface or using SNMP
Management Information Bases (MIBs). SNMP traps are used to provide
autonomous notifications of system problems (alarms and events). Any standard
trap manager may be used to monitor the system.
Features Introduced in FP1.1
2.13 The following new features are supported in FP1.1:
• Retrieve transmitted (PST) and received (PSR) optical power for an
SFP/XFP
• Retrieve transceiver temperature, internally measure supply voltage,
and transmit bias current for an optical SFP/XFP
• RADIUS protocol - The RADIUS protocol carries authentication,
authorization, and configuration information between a Tellabs 7300
NE (client) and the RADIUS server. It provides the ability to manage a
single database of users that contain user names, passwords, and
configuration information that can be used across many systems.
• Far End Fault Indication (FEFI)
• Configuration of Telemetry Parameters
• 32K MAC Table
• MAC Port Management
- Enable/disable VLAN ID translation
- Add, remove, modify VLAN ID mapping
• Static and Dynamic MAC Forwarding
• LAG Management
- Enable/disable VLAN ID translation
- Add, remove, modify VLAN ID mapping
- VLAN priority mapping
• Traffic Class Mapping
- Configuration of class of service, VLAN priority, and DEI
• Traffic Policer
- New color aware mode and meter type
• Scheduling
- SP + DWRR scheduling
To Next Page
Loading...
Need help?
General
