Tellabs 7300 Series User Manual

2. System Overview, Features, and Specifications System Manual
Page 2-6 8/09 76.7300FP11/2, Rev A
• Shaping
-Port
- Class of service
• Performance Management
- VLAN statistics - frames transmitted/received per VLAN
• AIS Management under MEP
• VLAN Mirroring
2.14 The Tellabs 7345 Switch supports the following new hardware
components in FP1.1:
• 82 version of 731150A/B/C 10G Switch modules (You must use the 82
issue 731150s, the 81 issue modules are not supported in FP1.1. The
82 issue 731150s support advanced functionality beginning in FP1.1
compared to the 81 issue modules.)
2.15 The Tellabs 7325 Ethernet Edge Switch is supported in FP1.1. The Tellabs
7325 Switch is an Ethernet switch that supports 1GE interfaces. The system
contains the following hardware components:
• One integrated 1G Edge Switch module which supports up to 24
triple-speed SFP-based interfaces.
• Integrated fan.
• Two removable power supply units.
Platform Applications
2.16 The Tellabs 7345 Switch is a key component of Tellabs’ Carrier Ethernet
portfolio designed to provide end-to-end Ethernet services. The Tellabs 7345
Switch is typically used in aggregation and customer premise locations. As an
aggregation device, the Tellabs 7345 Switch collects traffic from smaller Ethernet
switches (for example, Tellab 7325 Switch) and demarcation devices (for example,
Tellabs 7305 Ethernet Demarcation Device) and combines the traffic into highly
filled 10 GbE links that plug into large layer 2 or layer 3 networks. Other elements
of the Tellabs Carrier Ethernet solution are used to create these larger networks.
As a customer premise device, the Tellabs 7345 Switch is used at customer
locations that require uplinks as high as 10G or locations that require a higher
degree of resiliency than may be found in traditional non-redundant Ethernet
switch solutions.
2.17 Figure 2.1, page 2-7 depicts Tellabs’ Carrier Ethernet solution providing
end-to-end services. The Tellabs 8800 is a multipurpose router used to build core
IP/MPLS networks. The Tellabs 7100 is a Packet Optical Transport System that
combines ROADM based optical networking with high capacity Ethernet switching
for building large metro Ethernet networks. The Tellabs 7325 Switch is an Ethernet
Edge Switch that supports Ethernet aggregation and customer premise
applications for demands requiring multiple gigabit Ethernet or fast Ethernet
interfaces. The Tellabs 7305 is a 1G Ethernet Demarcation Device that provides
advanced Network Interface Device (NID) functionality for Ethernet service
handoffs.

Tellabs 7300 Series Specifications

General

Brand	Tellabs
Model	7300 Series
Category	Switch
Language	English