Tellabs 7300 Series User Manual

System Manual 1. Introduction
76.7300FP11/2, Rev A 8/09 Page 2-1
1. Introduction
1.01 This document provides an overview of the Tellabs
®
7345 Ethernet
Aggregation Switch (Tellabs 7345 Switch) and the Tellabs
®
7325 Ethernet Edge
Switch (Tellabs 7325 Switch) as well as specifications, installation, initialization,
maintenance, and troubleshooting information.
1.02 Tellabs 7300 Network Elements (NEs) refer to the following network
elements unless otherwise specified:
• Tellabs 7345 Ethernet Aggregation Switch
• Tellabs 7325 Ethernet Edge Switch
Reason for Issue 1.03 Tellabs issues this manual at Revision A to include the changes in Table
1.1, page 2-1.
Qualified Personnel
1.04 This document is intended for a Testing Engineer or Administrator who
may be involved in configuring the Tellabs 7345 Switch or the Tellabs 7235 Switch.
1.05 You should have a basic knowledge of Ethernet services, packet systems
and switches, and Quality of Service features supported by the hardware.
Conventions Used in This Manual
1.06 Table 1.2, page 2-1 describes the conventions and admonishments used
in this manual.
Table 1.1 Tellabs 7300 System Manual Revision History
Revision Change History Release Date
A Initial release for Tellabs 7345 Ethernet Aggregation Switch and Tellabs 7325
Ethernet Edge Switch FP1.1.x.
8/09
Table 1.2 Highlights of Syntax Conventions Used in this Manual
Convention Description
Courier Font All input commands and system responses are shown in Courier.
Note: Provides supplemental information or details.
Caution: Alerts you to the possibility of service interruption, such as a loss of traffic.
DANGER: Alerts you to the possibility of personal injury.
Warning: Alerts you to the possibility of equipment damage.

Tellabs 7300 Series Specifications

General

Brand	Tellabs
Model	7300 Series
Category	Switch
Language	English