Chapter 1 Introduction
SPECIFICATIONS
Preset ranges 0-1, 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000, 5000,
10000 ppm
0-1, 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000, 5000,
10000 mg/m
3
Custom ranges 0-1 to 10000 ppm
0-1 to 10000 mg/m
3
Zero noise 0.02 ppm RMS (30 second time setting)
Lower detectable limit 0.04 ppm
Zero drift (24 hour) < 0.1 ppm
Span drift (24 hour)
±
1% fullscale
Response time 60 seconds (30 second time setting)
Precision
±
0.1 ppm
Linearity
±
1% fullscale
≤
1000 ppm
±
2.5% fullscale > 1000 ppm
Sample flow rate 0.5-2 liters/min
Operating temperature 20 - 30
°
C (may be safely operated over the range of 0 -
45
°
C)*
Power requirements 105-125 VAC, 60 Hz
220-240 VAC, 50 Hz
100 Watts
Physical dimensions 16.75" (W) X 8.62" (H) X 23" (D)
Weight 45 lbs.
Outputs CO
selectable voltage
4-20 mA, RS-232, RS-485
* In non-condensing environments
1-3
To Next Page
Loading...
