Chapter 3 Operation
3-47
ALARMS
The Alarms menu, shown below, displays a list of items that are monitored by the
analyzer. If the item being monitored goes outside the lower or upper limit, the status of
that item will go from OK to either LOW or HIGH, respectively. The number in the
upper right-hand corner of the display indicates how many alarms have occurred. If no
alarms have occurred, the number zero is displayed.
To see the actual reading of an item and its minimum and maximum limits, move the
cursor to the item and press
ENTER
.
To display the Alarm menu:
From the Main Menu choose Alarm
To use the Alarm menu:
Use the
↑
and
↓
pushbuttons to move the cursor up and down
Press
ENTER
to select a choice
Press
MENU
to return to the Main Menu
Press
RUN
to return to the Run screen
Alarm Menu
To Next Page
Loading...
Need help?
General
