Chapter 3 Operation
3-27
Baud Rate
The Baud Rate screen, shown below, is used to set the RS-232 interface baud rate.
Baud rates of 1200, 2400, 4800, and 9600 are available.
To display the Baud Rate screen:
From the Main Menu choose Instrument Controls
From the Instrument Controls menu choose Baud Rate
To use the Baud Rate screen:
Use the
↑
and
↓
pushbuttons to increment/decrement the baud rate
Press
ENTER
to accept a change
Press
MENU
to return to the Instrument Controls menu
Press
RUN
to return to the Run screen
Baud Rate Screen
BAUD RATE 9600
SET TO 2400?
78 INC/DEC
To Next Page
Loading...
