Chapter 3 Operation
3-57
Min and Max Bias Voltage Limits
. The Min Bias Voltage limit screen, shown
below, is accessible only when the instrument is in the service mode. It is used to change
the min bias voltage alarm limit. The min and max Bias Voltage screens function the
same way.
To display the Min or Max Bias Voltage limit screen (service mode on):
From the Main Menu choose Alarm
From the Alarm menu choose Bias Voltage
From the Bias Voltage menu choose Min or Max
To use the Min or Max Bias Voltage limit screen (service mode on):
Use the
↑
and
↓
pushbuttons to increment/decrement the value
Press
ENTER
to accept the change
Press
MENU
to return to the Bias Voltage menu
Press
RUN
to return to the Run screen
Set Min Bias Voltage Screen
To Next Page
Loading...
Need help?
General
