Chapter 3 Operation
3-13
Custom Ranges Menu
The Custom Ranges Menu, shown below, lists three custom ranges: C1, C2, and C3.
Custom ranges are user-defined ranges. In the ppm mode, any value between 1 and
10,000 ppm can be specified as a range. In the mg/m
3
mode, any value between 1 and
10,000 mg/m
3
can be specified. See “Custom Range Screen” below for more information
about defining the custom ranges.
To display the Set Custom Ranges screen:
From the Main Menu choose Range
From the Range menu choose Set Custom Ranges
To use the Set Custom Ranges menu:
Use the
↑
and
↓
pushbutton to move the cursor between each custom range
Press
ENTER
to select the custom range to define
Press
MENU
to return to the Range menu
Press
RUN
to return to the Run screen
Set Custom Ranges Menu
To Next Page
Loading...
