Chapter 3 Operation
3-32
Date
The date is set by the Date screen as shown below. The first line of the display
shows the current date. The second line of the display is used to change the date.
The date is updated by the internal clock.
To display the Date screen:
From the Main Menu choose Instrument Controls
From the Instrument Controls menu choose Date
To use the Date screen:
Use the
↑
and
↓
pushbuttons to increment/decrement the month, day, and
year
Use the
←
and
→
pushbutton to move the cursor left and right
Press
ENTER
to accept a change
Press
MENU
to return to the Instrument Controls menu
Press
RUN
to return to the Run screen
Date Screen
DATE 11/26/02
SET TO 12/25/02
78 INC/DEC 65CURSOR
To Next Page
Loading...
Need help?
General
