Chapter 3 Operation
3-55
Min and Max Flow Limits
. The Min Flow limit screen, shown below, is
accessible only when the instrument is in the service mode. It is used to change the min
flow alarm limit. The min and max Flow screens function the same way.
To display the Min or Max Flow limit screen (service mode on):
From the Main Menu choose Alarm
From the Alarm menu choose Sample Flow
From the Sample Flow menu choose Min or Max
To use the Min or Max Flow limit screen (service mode on):
Use the
↑
and
↓
pushbuttons to increment/decrement the value
Press
ENTER
to accept the change
Press
MENU
to return to the Sample Flow menu
Press
RUN
to return to the Run screen
Set Min Sample Flow Screen
To Next Page
Loading...
Need help?
General
