Chapter 3 Operation
3-28
Instrument ID
The Instrument ID screen, shown below, enables the Instrument ID to be user-
defined. This is useful if two or more of the same instrument are connected to one
computer. Valid Instrument ID numbers are from 0 to 99. The Model 48C has a
default Instrument ID of 48. For more information about the Instrument ID, see
Appendix B, “RS-232 Commands.”
To display the Instrument ID screen:
From the Main Menu choose Instrument Controls
From the Instrument Controls menu choose Instrument ID
To use the Instrument ID screen:
Use the
↑
and
↓
pushbuttons to increment/decrement the ID number
Press
ENTER
to accept a change
Press
MENU
to return to the Instrument Controls menu
Press
RUN
to return to the Run screen
Instrument ID Screen
To Next Page
Loading...
Need help?
General
