Chapter 3 Operation
3-49
Min and Max Internal Temperature Limits
. The Min Internal Temperature
limit screen, shown below, is accessible only when the instrument is in the service mode.
It is used to change the min internal temperature alarm limit. The min and max Internal
Temperature screens function the same way.
To display the Min or Max Internal Temperature limit screen (service mode):
From the Main Menu choose Alarm
From the Alarm menu choose Internal Temperature
From the Internal Temperature menu choose Min or Max
To use the Min or Max Internal Temperature limit screen (service mode on):
Use the
↑
and
↓
pushbuttons to increment/decrement the value
Press
ENTER
to accept the change
Press
MENU
to return to the Internal Temperature menu
Press
RUN
to return to the Run screen
Set Min Internal Temperature Screen
CHAMBER TEMP:
ACTUAL 49.4dC
>MIN 40.0dC
MAX 52.0dC
To Next Page
Loading...
Need help?
General
