Appendix B RS-232 Commands
B-22
srec mem size
This command reports the maximum number of short records that can be stored with the
current settings and the number of blocks reserved for short records. The example below
is for a short record.
Send: "srec mem size"
Receive: "srec mem size 2038 recs, 10 blocks"
no of lrec
This command reports the number of long records collected.
The following example shows a
typical response to this command.
Send: "no of lrec"
Receive: "no of lrec 852 recs"
no of srec
This command reports the number of short records collected. The following example
shows a typical response to this command.
Send: "no of srec"
Receive: "no of srec 1265 recs"
set clr records
This command clears all short and long records stored.
Send: "set clr records"
Receive: "set clr records ok"
srec per
This command reports the srec logging period.
Send: "srec per"
Receive: "srec per 5 min"
To Next Page
Loading...
