Unit Description
30
CYCLE-SENTRY Start-Stop Controls
The CYCLE-SENTRY Start-Stop fuel saving system provides
optimum operating economy.
The CYCLE-SENTRY system automatically starts the unit on
microprocessor demand, and shuts down the unit after those
conditions are satisfied.
The system automatically monitors and maintains the
compartment temperature, engine block temperature, and
battery charge levels at a condition where quick, easy starts are
possible.
WARNING: The unit can start at any time without
warning. Press the O
FF key on the HMI control panel
and place the microprocessor On/Off switch in the
Off position before inspecting or servicing any part of
the unit.
Your Thermo King unit provides a wide range
of control and programming flexibility.
However, pre-programming of the unit
controller may prohibit operation in certain
temperature ranges within some modes and
may also prohibit certain modes of operation.
If you have controller programming questions,
contact your supervisor or your Thermo King
dealer before requesting service.
Unit Description
30
CYCLE-SENTRY Start-Stop Controls
The CYCLE-SENTRY Start-Stop fuel saving system provides
optimum operating economy.
The CYCLE-SENTRY system automatically starts the unit on
microprocessor demand, and shuts down the unit after those
conditions are satisfied.
The system automatically monitors and maintains the
compartment temperature, engine block temperature, and
battery charge levels at a condition where quick, easy starts are
possible.
WARNING: The unit can start at any time without
warning. Press the O
FF key on the HMI control panel
and place the microprocessor On/Off switch in the
Off position before inspecting or servicing any part of
the unit.
Your Thermo King unit provides a wide range
of control and programming flexibility.
However, pre-programming of the unit
controller may prohibit operation in certain
temperature ranges within some modes and
may also prohibit certain modes of operation.
If you have controller programming questions,
contact your supervisor or your Thermo King
dealer before requesting service.
To Next Page
Loading...
