Thermo King SB-210+ - Terminating a Defrost Cycle

Operating Instructions
71
Initiating a Manual Defrost Cycle
Defrost cycles are usually initiated automatically based on time
or temperature. Manual Defrost is also available if the unit is
running and the coil temperature is less than 45 F (7 C). Other
features such as door switch settings may not allow Manual
Defrost to be initiated.
Use the following steps to initiate a Manual Defrost:
1. Press the D
EFROST key. See Figure 46.
2. The “Defrost” Screen briefly appears. See Figure 47.
3. The “Programming Defrost” Screen briefly appears. See
Figure 47.
4. The “Defrost Started” Screen briefly appears. See Figure
47.
1. Standard Display
2. Defrost Key
Figure 46: Initiating a Manual Defrost Cycle
1
2
Operating Instructions
71
Initiating a Manual Defrost Cycle
Defrost cycles are usually initiated automatically based on time
or temperature. Manual Defrost is also available if the unit is
running and the coil temperature is less than 45 F (7 C). Other
features such as door switch settings may not allow Manual
Defrost to be initiated.
Use the following steps to initiate a Manual Defrost:
1. Press the D
EFROST key. See Figure 46.
2. The “Defrost” Screen briefly appears. See Figure 47.
3. The “Programming Defrost” Screen briefly appears. See
Figure 47.
4. The “Defrost Started” Screen briefly appears. See Figure
47.
1. Standard Display
2. Defrost Key
Figure 46: Initiating a Manual Defrost Cycle
1
2