Thermo King SB-210+ - Damper; Coils; Cargo Box; Cargo Doors

Manual Pretrip Inspection (Before Starting the Unit)
46
Damper: Make sure the damper in the evaporator air outlets
move freely, with no sticking or binding.
Coils: Make sure the condenser and evaporator coils are clean
and free of debris.
Cargo Box: Check the interior and exterior of the cargo box
for damage. Any damage to the walls or insulation must be
repaired.
Cargo Doors: Make sure that the cargo doors and weather
seals are in good condition. The doors should latch securely
and the weather seals should fit tightly.
Defrost Drains: Check the defrost drain hoses and fittings to
make sure they are open.
Manual Pretrip Inspection (Before Starting the Unit)
46
Damper: Make sure the damper in the evaporator air outlets
move freely, with no sticking or binding.
Coils: Make sure the condenser and evaporator coils are clean
and free of debris.
Cargo Box: Check the interior and exterior of the cargo box
for damage. Any damage to the walls or insulation must be
repaired.
Cargo Doors: Make sure that the cargo doors and weather
seals are in good condition. The doors should latch securely
and the weather seals should fit tightly.
Defrost Drains: Check the defrost drain hoses and fittings to
make sure they are open.