Topcon X14 - Chapter 14 - Auto Steering; Auto Steer Status

95
Chapter 14 – Auto Steering
The Steering Options Menu allows the operator to set options for the
auto steering. To use this feature, it must be enabled. If it has not
been enabled, refer to Guidance setup, page 28 to enable auto
steering.
To calibrate the steering refer to Steering Calibrations, page 67.
14.1. Auto steer status
Auto Steer Status allows the operator to view the status of the
conditions required for auto steering. Red indicates that the
conditions are not met and therefore steering is not ready.
1.
To review the status of the auto steering, select / Steering
Options Menu / Auto Steer Status .
The Steering Status screen displays.
Green indicates that the item is ready.
Red indicates that the item is not ready.
Steering alarms may be displayed by selecting the steering alarm
button at the bottom left of the screen.
2.
Select to return to the main screen and complete the
necessary actions (work through issues displayed from the top to
the bottom of the screen).