77
Chapter 11 – Field Menu
This chapter details how to set client, farm, field, boundaries and flag
points. These are the first steps when beginning a job.
The console will store the field information so that, once set up, the
field details can be recalled for other jobs in the same field.
Drive to the field and follow the steps to set up a field and identify its
features.
Note: The vehicle must be in or near the field for boundaries and
related information to appear on the screen.
11.1. Creating a client / farm / field
1.
Select / Field Menu / New Field .
Note: Default file names are provided when naming options
appear. It is highly recommended that the operator names items in
a thoughtful and structured way to allow easy use in future
seasons.
2. Select CLIENT NAME, (or select an existing client if some have
already been set up).
3. Select New, enter a name and confirm.
4. Select FARM NAME, (or select an existing farm name if some
have already been set up).
5. Enter a name and confirm.
6. Select FIELD NAME, enter a name and confirm.
7. Completing this section selects the new field, proceed to Setting a
new boundary, page 78.
Note: To change any of these settings after they have been
confirmed, refer to Inventory Manager, page 107.
11.2. Selecting a client / farm / field
Note: The vehicle must be in or near the field for boundaries and
related information to appear on the screen.
To Next Page
Loading...