10.4. Dealing with calibration errors/alarms
76
View Error
Wheel Angle Sensor Calibration
Failed
Repeat procedure and ensure the
steering axle moves through the
complete range.
Confirm wheel angle sensor position
information moves when steering
axle is turned.
Confirm wheel angle sensor
harnesses and connections. Check
wheel sensor condition.
Failed wheel angle sensor.
Wheel Angle Sensor Not Detected
Wheel angle sensor value is 0, check
wheel angle sensor harnesses and
sensor condition.
Vehicle profile error.
Guidance controller is not
configured for wheel angle sensor
use.
Receiver firmware version is out of
date
Update receiver firmware.
To Next Page
Loading...