Chapter 10 – Steering Calibrations
75
View Error
Parameters Mismatch
Vehicle geometry parameters do not
match the geometry configuration in
the steering system.
Re-select the vehicle on the Setup
screen or ensure the vehicle
geometry in the vehicle geometry
screen is correct.
Receiver Disconnected
The AGI receiver has shutdown, lost
power or the receiver – console serial
connection has been broken.
Check the power supply to the
receiver and ensure the serial
connection is good.
Compass Calibration Failed
Repeat compass calibration and
ensure the vehicle completes 1½
turns. Ensure the vehicle is stopped
when completing the procedure.
Move the receiver away from
magnetic sources.
To Next Page
Loading...