Chapter 5 – System Setup
39
3. Select the new symbol or select FLAG POINT NAME and type in
the new name for the flag, then confirm.
Note that flags can be changed but new preset flags cannot be
created.
5.5. Setting up utilities
1.
Select System / Utilities .
Console software upgrade
This option is used if the console software is being upgraded via a
USB.
Insert the USB containing the upgraded software. Selecting this option
displays a message that the console will restart. Confirm the message.
The console will restart and load the upgraded software.
The console will provide the option to restore all user data to the state it
was before the upgrade. Note: Selecting No will delete all data saved
on the console.
To Next Page
Loading...