9.8. Storing information about jobs
64
Guidance information
The guidance information panels may be configured to display one or
two of six possible options: cross track error, speed, heading, swath,
area worked or area remaining.
l Cross track error: Displays the distance of the vehicle from the
nearest wayline.
l Area worked: Displays the total area of the coverage, per boom
(including overlaps).
l Area remaining: Area that has not had coverage applied within
boundaries that are not excluded from the current job.
9.8. Storing information about jobs
The console allows operators to record and store features and working
files for many fields and for each job on each field.
Under each field, additional information such as obstacles and
boundaries can be stored.
Under each job, information about the job can be stored. It is
important to create clear names for farms, fields and jobs so that the
information can be accessed easily next season.
The operator can then select the field easily in the future and access
the same boundaries, flag points and guidelines without having to
recreate them.
9.9. Recognizing color and working status
The Operation screen uses colors to indicate the status of functions.
The exact meanings will vary slightly with the implements, choices
and features established during setup.
In general terms:
l Red indicates that the function cannot be used. Check that all
necessary items have been enabled and set up correctly.
l White indicates that the function is ready to use.
l Yellow and/or green indicate that the function is currently
working.
To Next Page
Loading...