Chapter 4 – Regional and User Settings
21
4.1.3. Units setup
The units options sets the displayed units of measurement (metric or
imperial), area and the latitude/longitude format.
To set unit information:
1.
Select User / Region / Units .
The following options are available:
Units
l Metric
l Imperial (US)
l Imperial (UK)
The United States (US) and United Kingdom (UK) imperial options are
provided because gallons, fluid ounces and bushels have different
measurements in the US and the UK.
Note: Changing this setting will not override the selection of
individual units (Pressure, Area etc.) that have been changed.
Latitude/longitude format
l Standard (decimal degrees: 45.54)
l DMS (Degrees, Minutes, Seconds: 45
o
, 23’ 36”)
Pressure units
l kPa (kilopascal)
l psi (pounds per square inch)
l bar
l Default: Selects the default setting appropriate for the selected Units
Short distance units
l Meters
l Inches
l Feet
l Default: Selects the default setting appropriate for the selected Units
To Next Page
Loading...