Chapter 10 – Steering Calibrations
69
WARNING: Ensure there is sufficient space for the vehicle
to complete the full maneuver before selecting Next. The
calibration will take up to 60 seconds in each of these
locked modes.
WARNING: Some vehicle models may automatically move
the wheels to the required position.
1.
Select / Steering Options Menu / Auto Steer
Calibration .
The Steering Calibration screen displays.
2. Select WHEEL ANGLE SENSOR. If the component reports as
calibrated, still complete the calibration procedure if the receiver has
not been calibrated on this vehicle.
Note: The number of screens and contents of screens may vary
depending on the vehicle and type of steering controller. If an error
displays, read the message and take the recommended action before
proceeding.
3. Drive the vehicle forward to start the procedure. The wheel angle
sensor calibration should be completed at 2 kph (1.2 mph).
To Next Page
Loading...