Toro GrandStand 74534 - Page 107

CONTROLS
4-40 36” & 40” Toro GrandStand Service Manual
4
16. Position the cable adjustment nuts in the slots on the
crossbraceandsecureusingthespringclip(Fig.
330).
17. Secure the control cables to the motion control
leversusingashoulderboltandangenut(Fig.
331).
Fig. 329 DSCN-3803a
Fig. 330 DSCN-3804a
Fig. 331 DSCN-3671a
18. Placethespeedcontrolleverintothe“FAST”
position(Fig.332).
Fig. 332 DSCN-3806a
15. Secure the fuel vent hose to the control assembly
usingacabletie(Fig.329).