Toro GrandStand 74534 - Speed Control Installation

CONTROLS
4-36 36” & 40” Toro GrandStand Service Manual
4
Speed Control Installation
Note: The wave washers must be nested together,
not alternating (Fig. 315).
Fig. 313 DSCN-3741a
2. Positionthecarriagebolt,washer,spacer,andwave
washersontothecontrolassembly(Fig.314).
Fig. 314 DSCN-3753a
Fig. 315 DSCN-3748a
3. Securethehandletothecontrolassemblyusingthe
retainer,lockwasher,andangenut(Fig.316).
Note: The speed control handle must move freely,
yet have adequate drag to keep it from
moving during operation.
Fig. 316 DSCN-3757a
1. Securethethreepulleystothecontrolassembly
usingwashersandnuts(Fig.313).