MOWER DECK
7-14 36” & 40” Toro GrandStand Service Manual
7
36” Mower Deck Belt Idler
Replacement
36” Mower Deck Belt Idler Removal
1. Turn the ignition off and remove the key.
2. Move the mower deck to the 1” (25mm) HOC.
3. Remove the belt covers.
4. Remove the extension spring from the anchor post
(Fig. 593).
20. Install the extension spring to the idler bracket and
spring anchor (Fig. 592).
Fig. 592 DSCN-3121a
Fig. 593 DSCN-3449a
22. Install the belt covers.
5. Remove the belt from the idler pulley.
6. Raise the machine to access to underside of the
mower deck.
To Next Page
Loading...
