Toro GrandStand 74534 - 40 Mower Deck Belts RH Idler Installation

MOWER DECK
7-26 36” & 40” Toro GrandStand Service Manual
7
40” Mower Deck Belts RH Idler Installation
1. Secure the idler pulley to the idler arm using the
carriagebolt,washer,andangenut(Fig.634).
2. Placetheboltthroughthetwowashers,twofriction
washers,spacer,andidlerarm(Fig.636).
Fig. 634 DSCN-3275a
Note: The taller side of the idler pulley hub faces the
idler arm (Fig. 635).
Fig. 635 DSCN-3239a
Fig. 636 DSCN-3277a
Note: The two friction washers must have the
spacer nested into their center (Fig. 637).
Fig. 637 DSCN-3280a