Toro GrandStand 74534 - Speed Control Replacement; Speed Control Removal

CONTROLS
4-32 36” & 40” Toro GrandStand Service Manual
4
Speed Control Replacement
Speed Control Removal
9. Withtheenginethrottlecontrolleverinthe“Fast”
position,pulltheslackfromthecablejacketand
tightenthethrottlecableclamp(Fig.298).
10. Ensurethethrottleisfunctioningcorrectlybymoving
thethrottleleverfrom“FAST”to“SLOW”while
observingtheenginethrottlelever.
1. Removetheshoulderboltsandangenutssecuring
the ends of the control cables to the motion control
levers(Fig.299).
Fig. 298 DSCN-3561a
Fig. 299 DSCN-3671a
2. Removethespringclip(Fig.300).
Fig. 300 DSCN-3692a