Toro GrandStand 74534 - 36 Mower Deck Belt Idler Installation; Mower Deck Cont

MOWER DECK
7-16 36” & 40” Toro GrandStand Service Manual
7
36” Mower Deck Belt Idler Installation
11. Removethecarriagebolt,washer,andangenut
securingtheidlerpulleytotheidlerarm(Fig.598).
1. Install the upper and lower bushings into the idler
arm hub (Fig. 599).
Fig. 598 DSCN-3462a
Fig. 599 DSCN-3465a
2. Installthegreasettingintotheidlerarmhub(Fig.
600).
Note: Installthettingsoitispointingupwards.
Fig. 600 DSCN-3468a