Toro GrandStand 74534 - Choke Cable Replacement; Choke Cable Removal

CONTROLS
4-24 36” & 40” Toro GrandStand Service Manual
4
Choke Cable Replacement
Choke Cable Removal
11. Securetheliftlinkassemblytothelowerendofthe
HOChandle(Fig.267).
1. Removetheboltandcableclampsecuringthe
chokecabletotheenginethrottleplate(Fig.269).
Fig. 267 DSCN-3841a
12. PumphightempgreaseintotheHOChandlepivot
hub(Fig.268).
Fig. 268 DSCN-3915a
Fig. 269 DSCN-3505a
2. Removethe“Z”bendofthechokecablefromthe
enginechokearm(Fig.270).
Fig. 270 DSCN-3509a
13. Raisethedeckandremovetheboards.