Toro GrandStand 74534 - Skid Plate Removal; Skid Plate Installation

MOWER DECK
7-3336” & 40” Toro GrandStand Service Manual
7
SkidPlateRemoval SkidPlateInstallation
2. 40” Deck Only: Secure the skid plate to the mower
deck using the three sets of carriage bolts and nuts
(Fig. 663).
1. Raise the machine to access the underside of the
mower deck.
2. 36” Deck Only: Remove the four sets of carriage
bolts and nuts securing the skid plate to the mower
deck (Fig. 660).
1. 36” Deck Only: Secure the skid plate to the mower
deck using the four sets of carriage bolts and nuts
(Fig. 662).
Fig. 660 DSCN-3502a
3. 40” Deck Only: Remove the three sets of carriage
bolts and nuts securing the skid plate to the mower
deck (Fig. 661).
Fig. 661 DSCN-3310a
Fig. 662 DSCN-3502a
Fig. 663 DSCN-3310a