Toro GrandStand 74534 - Engine Installation

ENGINE
5-10 36” & 40” Toro GrandStand Service Manual
5
Engine Installation
1. Secure the RH and LH mufer brackets to the
engine using four bolts and lock washers (Fig. 375).
4. Install the two bolts, spacers, and nuts securing the
left and right side mufer brackets to the mufer (Fig.
378).
3. Secure the mufer to the engine using four nuts and
lock washers. Torque to 19 ± 2 ft-lbs. (26 ± 3 Nm)
(Fig. 377).
Fig. 375 IMG-0528a
2. Position an exhaust gasket on the exhaust studs for
both exhaust ports (Fig. 376).
Fig. 376 IMG-0531a
Fig. 377 IMG-0532a
Fig. 378 IMG-0542a