Toro GrandStand 74534 - Front Strut Installation

MOWER DECK
7-40 36” & 40” Toro GrandStand Service Manual
7
Front Strut Installation
3. Remove the spacer from the suspension bushing
(Fig.685).
1. Apply a thin layer of grease to the outer lip of the
suspensionbushing(Fig.687).
Fig. 685 DSCN-3373a
4. Usinganarborpress,removethesuspension
bushingfromthestrut(Fig.686).
Fig. 686 DSCN-3375a
Fig. 687 DSCN-3362a
2. Usinganarborpress,installthesuspensionbushing
intothestrut(Fig.688).
Fig. 688 DSCN-3375a
5. Repeat steps 3 and 4 on the other end of the strut.