Toro GrandStand 74534 - 40 Mower Deck Belts Replacement; 40 Mower Deck RH Spindle Belt Removal; 40 Mower Deck RH Spindle Belt Installation

MOWER DECK
7-2 36” & 40” Toro GrandStand Service Manual
7
40” Mower Deck Belts Replacement
40” Mower Deck RH Spindle Belt Removal
40” Mower Deck RH Spindle Belt
Installation
1. Turn the ignition off and remove the key.
2. Move the mower deck to the 1” (25mm) HOC.
3. Remove the RH belt cover.
4. Remove the RH extension spring from the anchor
post (Fig. 547).
1. Route the RH belt around the deck pulleys (Fig.
549).Form3368-755,Page10,BeltRouting
Fig. 547 DSCN-3117a
5. Remove the RH belt from the deck pulleys (Fig.
548).
Fig. 548 DSCN-3119a
Fig. 549 g.119-0187
2. Install the extension spring to the RH idler bracket
and spring anchor (Fig. 550).
Fig. 550 DSCN-3117a
3. Install the RH belt cover.