Toro GrandStand 74534 - Motion Control Cable Replacement; Motion Control Cable Removal

CONTROLS
4-12 36” & 40” Toro GrandStand Service Manual
4
Motion Control Cable Replacement
Motion Control Cable Removal
1. Removetheshoulderboltandangenutsecuring
the end of the control cable to the motion control
lever(Fig.223).
4. Removethetwothreadformingscrewsandcable
clampsecuringthelowercabletothecablebracket
(Fig.226).
3. Remove the cable adjustment nut from the cross
bracket(Fig.225).
Fig. 223 DSCN-3671a
2. Removethespringclipfromthecrossbracket(Fig.
224).
Fig. 224 DSCN-3672a
Fig. 225 DSCN-3674a
Fig. 226 DSCN-3679a