Toro GrandStand 74534 - Choke Cable Installation

CONTROLS
4-26 36” & 40” Toro GrandStand Service Manual
4
Choke Cable Installation
1. Feedthechokecablethroughthemountingholein
thecontrolpanel(Fig.274).
3. Feedthecablethroughtheframe,totheleftofthe
brakelinkage(Fig.276).
Fig. 274 DSCN-3518a
2. Securethechokecabletothecontrolpanelusinga
nut(Fig.275).
Fig. 275 DSCN-3515a
Fig. 276 DSCN-3519a
4. Feedthechokecablethroughthe”R”clamplocated
onthecarrierframe(Fig.277).
Fig. 277 DSCN-3522a