Toro GrandStand 74534 - Motion Control Cable Installation

CONTROLS
4-1336” & 40” Toro GrandStand Service Manual
4
Motion Control Cable Installation
5. Removetheboltandangenutsecuringthecableto
thepumpassembly(Fig.227).
1. Securethecablerodendtothepumpassembly
usingtheboltandangenut(Fig.228).
Fig. 227 DSCN-3682a
Fig. 228 DSCN-3682a
2. Securethelowercabletothecablebracketusing
thetwothreadformingscrewsandcableclamp(Fig.
229).
Fig. 229 DSCN-3679a