Toro GrandStand 74534 - Parking Brake Installation

CONTROLS
4-16 36” & 40” Toro GrandStand Service Manual
4
Parking Brake Installation
5. RemovetheboltandnutsecuringtheRHsideofthe
brakeandtorsionspringassembliestothechassis
(Fig.238).
6. Removetheshoulderbolt,spacer,andnutsecuring
theLHsideofthebrakeassemblytothechassis
(Fig.239).
1. SecuretheLHsideofthebrakeassemblytothe
chassisusingtheshoulderbolt,spacer,andnut(Fig.
240).
Fig. 238 DSCN-3826a
Fig. 239 DSCN-3825a
Fig. 240 DSCN-3825a
2. SecuretheRHsideofthebrakeandtorsionspring
assembliestothechassisusingthebolt,spacers,
andwashers(Fig.241).
Note: Position one end of the torsion spring under
the brake assembly, position the other over
the spring anchor bolt.
Fig. 241 DSCN-3826a